 |
|
|
"SIPS is Better"
|
|
|
Sound Transmission Characteristics of a SIP panel was tested, in accordance with ASTM standard E-90 and was found to have a Sound Transmission Loss (STC) of -32 dB.
Thermal Performance or "R" value of Total "R" value may include finish materials that are installed on site. The net effective whole wall "R" value as calculated by Oak Ridge Labs is as much as 88% higher than indicated.
|
|
Specifications subject to change without notice |
| 1. Floor system per design and local code. |
| 2. Anchor bolts, size and spacing per local codes. |
| 3. 2 X treated as a Capillary break. |
| 4. Wall panel, see load tables for size requirements. Set bottom plate with sealant on all sides, attach per design. |
| 5. Wall panel, see load tables for size requirements. Set bottom plate with sealant on all sides, attach per design. |
| 6. Upper floor/wall top plate. |
| 7. Panel screws, spacing per uplift specifications. |
 | For roof panel, see load tables for span and sizing. Set in adhesive on wall and ridge beam. Screw into place with panel screws. |
|
|
|
